Once you’ve emptied and cleaned cabinets and drawers, the next step is to make sure the floors are clean.
never be cleaned with water.Water could permanently damage your Dyson V7’s electronics and may also be dangerous when you switch the vacuum back on..
So, be careful when cleaning your Dyson!As a general rule, you should only use water on components that you can verify are completely plastic without any electronics (e.g.the dust canister).. With that out of the way, here’s how to clean the main body of your Dyson V7:.
Carefully rinse the dust canister in cold water to remove dust and dirt.You can also use a damp cloth to wipe it down.
make sure you don’t get the two electrical contacts on the upper rim wet..
Allow the dust canister enough time to completely dry (at least 24 hours), otherwise dust will just re-stick to the sides as soon as you switch the vacuum on.A. burning smell from a vacuum cleaner.
is likely to be a mechanical fault, such as a damaged drive belt.. 1.Change the Bag or Clean the Dirt Canister.
It sounds obvious, but emptying the bag or dirt canister is often the quickest way to make your vacuum smell better..If you have a bagless vacuum, then it’s also a good idea to clean the canister.